What you will learn?

Medium RPC with Precision Agriculture Using Drones

Sr. No.	Subject	Duration
1	Stakeholders and their Laws, Drone Rules 2021	1:30 Hours
2	Basic Principles of Flight	1:00 Hours
3	ATC Procedures and Radio Telephony	1:15 Hours
4	Fixed wing Operations and Aerodynamics	1:15 Hours
5	Rotorcraft Operations and Aerodynamic	1:30 Hours
6	Hybrid Operations and Aerodynamics	0:30 Hours
7	Weather and Meteorology	1:15 Hours
8	Drone Equipment and maintenance	1:30 Hours
9	Risk Assessment and Analysis – Safety Management / TEM	1:30 Hours
10	Payload installation and utilization	1:15 Hours
11	Intro to Drone Data and Analysis	1:30 Hours

Sr. No.	Subject	Duration
Assesment	Theory Test - Final	0:40 Hours
Ex. 1, 2, 3	Introduction to flight simulator, simulator familiarization, control check, pre-flight checks, Take off, cruise.	0:30 Hours
Ex. 4, 5, 6	Approach, go-around and landing, post flight checks, Cruise and Turns, Climbing and Climbing Turns, Descend and Descending Turns	0:30 Hours
Ex. 7, 8	Disorientation and Recovery, Circuit Flying – Rectangle/ Square/ Circle / Orbit, Flying – Figure of 8	0:30 Hours
Ex. 9	Gimbal Controls (Pan, tilt and zoom	0:30 Hours
Ex. 10	Night flying	0:30 Hours
Ex. 11	Abnormal/ Emergency procedures	0:15 Hours
Ex. 12	Sim Test	0:15 Hours

Sr. No.	Subject	Duration
Ex. 1	Intro to Digital Sky platform	0:30 Hours
Ex.2	RPAS familiarization and Safety briefing	0:15 Hours
Ex.3	Introductory flight where the student experiences sensitivity of controls and learning the orientation of the RPA.	0:15 Hours
Ex.4	Takeoff, Climbing, descending and maintaining height.	0:15 Hours
Ex.5	Basic Controls: Pitch, Roll and Yaw	0:15 Hours
Ex.6	Flying in a disorientation scenario and to recovery from the same.	0:15 Hours
Ex.7	Progress Check – Multirotor	0:15 Hours
Ex.8	Level turns in both directions	0:15 Hours
Ex.9	Climbing and descending turns	0:15 Hours
Ex.10	Left and right square circuits patterns	0:15 Hours
Ex.11	Flying in circles	0:15 Hours
Ex.12	Flying in figure of 8	0:15 Hours
Ex.13	Mission Planning and Instrument Flying	0:15 Hours
Ex.14	Auto Mission and Flight	0:15 Hours
Ex.15	Night Flying	0:15 Hours
Ex.16	Abnormal/ Emergency procedures	0:15 Hours
Ex.17	Final Test – Multirotor	00:20 Hours

Sr. No.	Subject	Duration
1	Safety: DGCA Rules and Regulations, Regulatory Overview	20:00 Hours
2	Fertilizers, Insecticides, Pests, Diseases
3	Fertilizers, Insecticides, Pests, Diseases
4	Nozzles, GPS/RTK, Terrain Following
5	Crops (Kharif, Rabi, Zaid), Crop Cycles
6	Spray Theory: Droplets, Swath, Drift Control
7	Optimal Altitude/Speed, Weather
8	Mission Planning (Simulations)
9	Loading & Managing Liquid Payloads
10	Flight Execution, Emergency Handling
11	Interfacing with Farmers / Agri Experts
12	Intro to AI/ML in Agriculture
13	NDVI, RGB, Multispectral Basics
14	Crop Health Monitoring (Computer Vision)
15	Processing Tools: Pix4D, DroneDeploy, Agisoft
16	Identifying Plant Stress, Pests, Diseases
17	Predictive Analytics & Yield Estimation
18	IoT Integration, AI Dashboards, DSS
19	Smart Spraying: VRA & Fleet Coordination
20	Final Test Theory

Sr. No.	Subject	Duration
1	Introduction to Flight Simulator	01:15 Hours
2	Sim familiarization, Controls check
3	Pre-flight checks, Take-off, Cruise
4	Approach, Go-around & Landing
5	Cruise & Turns, Climbing/Descending Turns
6	Night Flying
7	Abnormal / Emergency Procedures
8	Final Test
9	Cleaning of Tank	02:00 Hours
10	Nozzle Maintenance
11	Pump Maintenance
12	Flow Sensor Maintenance
13	Terrain Following & Obstacle Avoidance
14	Terrain Following & Obstacle Avoidance

Sr. No.	Subject	Duration
1	RPAS familiarization, Pre-flight checks & Safety Briefing	02:30 Hours
2	Intro Flight – Orientation & Sensitivity
3	Manual Take-off & Hovering
4	Auto Mission & Instrument Flying
5	NDVI / RGB Imaging Capture (AI Use Case)
6	Manual & Spot Spraying Simulation
7	AI-Based Object Detection Exercise
8	Lawnmower/Grid Pattern Flight (AI-Assisted
9	Emergency RTH Simulation
10	Battery, Propeller, Tank, Landing Gear Replacement