What you will learn?

Small RPC with Drone Mapping and Surveying

Sr. No.	Subject	Duration
1	Stakeholders and their Laws, Drone Rules 2021	1:30 Hours
2	Basic Principles of Flight	1:00 Hours
3	ATC Procedures and Radio Telephony	1:15 Hours
4	Fixed wing Operations and Aerodynamics	1:15 Hours
5	Rotorcraft Operations and Aerodynamic	1:30 Hours
6	Hybrid Operations and Aerodynamics	0:30 Hours
7	Weather and Meteorology	1:15 Hours
8	Drone Equipment and maintenance	1:30 Hours
9	Risk Assessment and Analysis – Safety Management / TEM	1:30 Hours
10	Payload installation and utilization	1:15 Hours
11	Intro to Drone Data and Analysis	1:30 Hours

Sr. No.	Subject	Duration
Assesment	Theory Test - Final	0:40 Hours
Ex. 1, 2, 3	Introduction to flight simulator, simulator familiarization, control check, pre-flight checks, Take off, cruise.	0:30 Hours
Ex. 4, 5, 6	Approach, go-around and landing, post flight checks, Cruise and Turns, Climbing and Climbing Turns, Descend and Descending Turns	0:30 Hours
Ex. 7, 8	Disorientation and Recovery, Circuit Flying – Rectangle/ Square/ Circle / Orbit, Flying – Figure of 8	0:30 Hours
Ex. 9	Gimbal Controls (Pan, tilt and zoom	0:30 Hours
Ex. 10	Night flying	0:30 Hours
Ex. 11	Abnormal/ Emergency procedures	0:15 Hours
Ex. 12	Sim Test	0:15 Hours

Sr. No.	Subject	Duration
Ex. 1	Intro to Digital Sky platform	0:30 Hours
Ex.2	RPAS familiarization and Safety briefing	0:15 Hours
Ex.3	Introductory flight where the student experiences sensitivity of controls and learning the orientation of the RPA.	0:15 Hours
Ex.4	Takeoff, Climbing, descending and maintaining height.	0:15 Hours
Ex.5	Basic Controls: Pitch, Roll and Yaw	0:15 Hours
Ex.6	Flying in a disorientation scenario and to recovery from the same.	0:15 Hours
Ex.7	Progress Check – Multirotor	0:15 Hours
Ex.8	Level turns in both directions	0:15 Hours
Ex.9	Climbing and descending turns	0:15 Hours
Ex.10	Left and right square circuits patterns	0:15 Hours
Ex.11	Flying in circles	0:15 Hours
Ex.12	Flying in figure of 8	0:15 Hours
Ex.13	Mission Planning and Instrument Flying	0:15 Hours
Ex.14	Auto Mission and Flight	0:15 Hours
Ex.15	Night Flying	0:15 Hours
Ex.16	Abnormal/ Emergency procedures	0:15 Hours
Ex.17	Final Test – Multirotor	00:20 Hours

Sr. No.	Subject	Duration
DGCA Rules and Regulations	Regulatory framework, compliance, permissions	20:00 Hours
Fundamentals of Surveying & Drone Mapping	Types of surveying, sensors (RGB, multispectral, LiDAR, thermal), GCPs, RTK/PPK
Mission Planning & Field Preparation	Pix4D, DroneDeploy, QGroundControl, overlaps, altitude, checklists, GCP techniques
Live Drone Mapping Flight	Data acquisition, GNSS/RTK workflow, troubleshooting, documentation
Data Processing & Analysis	Pix4D, DroneDeploy, Metashape workflows, DSM/DTM, contours, volumes, exporting maps
Case Studies & Final Project	Mining, real estate, agriculture, construction, ethics, complete mapping project
Final Theory Test

Sr. No.	Subject	Duration
1	Introduction to Flight Simulator	01:15 Hours
2	Sim familiarization, Controls check
3	Pre-flight checks, Take off, Cruise
4	Approach, Go-around & Landing
5	Cruise & Turns, Climbing & Climbing Turns
6	Descending & Descending Turns
7	Night Flying
8	Abnormal/Emergency Procedures
9	Final Test

Sr. No.	Subject	Duration
1	RPAS familiarization, Pre-flight checks & Safety briefing	02:45 Hours
2	Introductory flight & control sensitivity
3	Manual Take-off & Hovering
4	Manual Grid Flying (Without Software)
5	Auto-Mapping Mission (Mission Planner / Drone Deploy / Pix4D)
6	Corridor Mapping Exercise
7	Image Capture Exercise
8	Emergency Handling During Mapping
9	RTK/PPK-based Mapping (Advanced)
10	Post-Processing Orientation (Non-Flying)
11	Final Test – Multirotor