RPTO India
All Courses

What you will learn?

Small RPC with Drone Maintenance & DaaS Training

PART A

Theory Sessions – Day 1 & 2

Sr. No.SubjectDuration
1Stakeholders and their Laws, Drone Rules 20211:30 Hours
2Basic Principles of Flight1:00 Hours
3ATC Procedures and Radio Telephony1:15 Hours
4Fixed wing Operations and Aerodynamics1:15 Hours
5Rotorcraft Operations and Aerodynamic1:30 Hours
6Hybrid Operations and Aerodynamics0:30 Hours
7Weather and Meteorology1:15 Hours
8Drone Equipment and maintenance1:30 Hours
9Risk Assessment and Analysis – Safety Management / TEM1:30 Hours
10Payload installation and utilization1:15 Hours
11Intro to Drone Data and Analysis1:30 Hours

Simulator Session – Day 3

Sr. No.SubjectDuration
AssesmentTheory Test - Final0:40 Hours
Ex. 1, 2, 3Introduction to flight simulator, simulator familiarization, control check, pre-flight checks, Take off, cruise.0:30 Hours
Ex. 4, 5, 6Approach, go-around and landing, post flight checks, Cruise and Turns, Climbing and Climbing Turns, Descend and Descending Turns0:30 Hours
Ex. 7, 8Disorientation and Recovery, Circuit Flying – Rectangle/ Square/ Circle / Orbit, Flying – Figure of 80:30 Hours
Ex. 9Gimbal Controls (Pan, tilt and zoom0:30 Hours
Ex. 10Night flying0:30 Hours
Ex. 11Abnormal/ Emergency procedures0:15 Hours
Ex. 12Sim Test0:15 Hours

Flying Session – Day 4 & 5

Sr. No.SubjectDuration
Ex. 1Intro to Digital Sky platform0:30 Hours
Ex.2RPAS familiarization and Safety briefing0:15 Hours
Ex.3Introductory flight where the student experiences sensitivity of controls and learning the orientation of the RPA.0:15 Hours
Ex.4Takeoff, Climbing, descending and maintaining height.0:15 Hours
Ex.5Basic Controls: Pitch, Roll and Yaw0:15 Hours
Ex.6Flying in a disorientation scenario and to recovery from the same.0:15 Hours
Ex.7Progress Check – Multirotor0:15 Hours
Ex.8Level turns in both directions0:15 Hours
Ex.9Climbing and descending turns0:15 Hours
Ex.10Left and right square circuits patterns0:15 Hours
Ex.11Flying in circles0:15 Hours
Ex.12Flying in figure of 80:15 Hours
Ex.13Mission Planning and Instrument Flying0:15 Hours
Ex.14Auto Mission and Flight0:15 Hours
Ex.15Night Flying0:15 Hours
Ex.16Abnormal/ Emergency procedures0:15 Hours
Ex.17Final Test – Multirotor00:20 Hours

PART B

Theory Session – Day 1 – 2.5

Sr. No.SubjectDuration
1Safety: DGCA Rules and Regulations, Regulatory Overview20:00 Hours
2Drone Fundamentals & Assembly Basics
3Drone Types: Multirotor, Fixed-Wing, Hybrid
4Key Components: FC, Motors, ESCs, GPS, Frame
5Bill of Materials (BoM), Safety Tools & Protocols
6Basic Flight Principles
7Electronics, Wiring & Configuration
8Component Identification
9Tool Handling & Mock Drone Frame Setup
10Troubleshooting & Battery Management
11Drone as a Service (DaaS)
12Capstone Project & Final Evaluation
13Final Theory Test

Simulator Session – Day 3

Sr. No.SubjectDuration
1Assembly Session (Frame Assembly & Calibration)04:00 Hours

Flying Sessions

Sr. No.SubjectDuration
1RPAS Familiarization, Pre-flight Checks & Safety Briefing01:15 Hours
2Introductory Flight (Orientation & Control Sensitivity)
3Manual Take-Off & Hovering
4Auto Mission & Flight, Mission Planning & Instrument Flying

Outcome: DGCA Certified Remote Pilot Instructor (RPI) – Medium Class

  • Understand DGCA rules, airspace structure, safety protocols, and RPAS responsibilities.
  • Identify, assemble, configure, and calibrate key drone components (FC, ESC, GPS, motors, frame, power).
  • Apply flight principles and demonstrate technical skills in wiring, troubleshooting & battery management.
  • Develop flying proficiency through simulator and real-time sessions.
  • Plan and conduct autonomous missions using ground control software.
  • Demonstrate operational readiness through capstone project and final evaluation.
  • Understand Drone-as-a-Service (DaaS) applications in mapping, agriculture, inspection, and industry.
Join WhatsApp